Coprox Waterproof Dualcoat 25kg&1kg Coprox Waterproof Dualcoat is an easy and effective cement-based waterproofing or decorative wall and floor coating suitable for commercial and domestic applications. It is ideal for the waterproofing of water-bearing positive side surfaces or interior surfaces such as bathrooms, showers and kitchens. Coprox Waterproof Dualcoat provides waterproofing and an aesthetically attractive decorative finish all in one step. It eliminates the need for plaster, paint and tiles, providing an attractive and unique naturally aged, mottled and rustic finish, which becomes more pronounced over time. It is available in a wide range of striking colours. It can be brush applied as an elegantly textured finish to a variety of surfaces or can be trowelled to a classic glass-smooth skim coat finish onto walls, floors and over clay tiles. DescriptionPreventative & Remedial Waterproofing for Water Bearing Positive Side SurfacesDecorative Textured or Skim Coat FinishSuitable for Brick, Mortar, Screed, Concrete, Plaster, Painted Surfaces, Dry Wall Partitioning and Clay Tiles Suitable SurfacesSufficiently aged and cured virgin mortar, screed, concrete and plaster of recognised building mix standards.Good quality virgin cement and clay bricks.Virgin clay tiles.Surfaces should be rigid to avoid cracking. If in any doubt as to surface suitability, do a test area first. Weather ConditionsDo not apply to exterior surfaces if rain is imminent, during high winds or freezing temperatures. Surface PreparationMasonry Surfaces & Clay TilesEnsure the surfaces are free of any negative moisture. Should this not be the case, the surfaces must first be treated with Coprox Masonry Waterproofing or if necessary, plastered with Coprox Waterproof Cement Additive added to the plaster mix before proceeding with the application. Surfaces such as boundary and retaining walls must also be treated in this manner before the application commences.Remove any efflorescence whilst dry using a stiff bristle scrubbing brush.All surfaces must be free of dust, dirt and all other foreign matter. MixingPour 7 litres of clean water into a clean plastic container. To minimise crazing and cracking, substitute 1 litre of water with 1 litre of Coprox Cobond.Sprinkle 25 kg Coprox Waterproof Dualcoat slowly into the clean water stirring constantly until smooth and free of lumps. Use immediately. To prevent settling, stir frequently throughout the application.Learn more about this product here. View our Waterproofing range here
